- Dry-armature construction
- Designed for hot or cold water applications
- Flow rate up to 10 litres per minute
- Food-grade materials used throughout
Beta Valve produce two versions our hi-flow solenoid valve for vending machine applications:
The 155 which is a 2-way dry armature solenoid valve, with an 8 or 12-mm orifice.
The 355 series uses an innovative design that opens a third port at the top of the outlet as the valve shuts off the flow of water into the cup.
By allowing air into the dispense pipe like this the flow of water into the cup is improved, filling a standard sized cup in under 2.5 seconds. The vent after vend design also gives a move precise shut off with a "cleaner" end to the flow.
The E355 will operate successfully with a very small head of water allowing it to draw water the hottest water from the top of the boiler.
For in-cup designs the faster flow not only reduces vend times but also increases flow aggression improving the mixing of ingredients.
Product
datasheets:
|
